For CPAP machines made by any manufacturer
"Comfo-Seal" Nasal Mask Photo above

The "Comfo-Seal" mask features a pliable foam cushion (the "Comfo-Seal"), which molds itself to many different facial shapes, so fewer sizes are required. It is available in three sizes and with either standard and notched Comfo-Seals that are quickly interchangeable. Each mask is comprised of two components: The mask and the Comfo-Seal. All mask components may be purchased separately to keep patient maintenance cost at a minimum.

All Comfo-Seal masks have a single pressure port installed for supplying supplemental oxygen or for connecting to a manometer, dual ports available on request.

54xx series tubing for 360° swivel to either side or overhead is shown on right. To use 51xx or 53xx tubing, order 90° elbow number 1471-4 separately. To order mask, see catalog number V86008 or V86010.

"Comfo-Seal" Foam Cushions
With or Without Nasal Notch

The Comfo-Seal is the soft blue foam cushion that
touches the face, it snaps easily intothe inside of the "Comfo-Seal" mask. Due to the generous thickness of the Comfo-Seal no "spacer" is required. The Comfo-Seal is meant to be re-placed every six month to guarantee a clean, soft seal all of the time. Patients with strong, protruding foreheads are prone to leakage problems at the bridge of the nose. Our notched Comfo-Seal solves that problem. Look close, the top Comfo-Seal is the one with the notch.

Standard "SI" Style Nasal Mask
With the optional "Ultimate seal"

The "SI" nasal mask is compatible with masks available from Respironics and other CPAP system manufacturers and can be used as a direct replacement. As a Respironics replacement, the Respironics "Whisper Swivel" is not required. It is available in small, medium-small, medium and large.

The new "Ultimate Seal" provides more comfort and freedom from leaks. It is an approximately 3mm thick gel "sandwich" that makes a perfect, leak tight seal between mask and face. The Ultimate Seal will not irritate skin and has no adhesives or latex. Use 51xx or 53xx Series tubing for 360° swivel to either side or overhead. Photo also shows optional chinstrap. Two ports for pressure monitoring or supplemental oxygen delivery are standard on all "SI" style masks. To order, see catalog number V86060. Order headgear and "Ultimate Seal" separately.