Model 6121



Size: 2.4" x 0.8" x 4.2" (6.1cm x 2cm c 10.7cm)
Weight: 5 oz (142 gm) including battery
Power Source: 9V Alkaline battery
Battery Indicator: Illuminates when time to replace battery.
Current Range: Ten (10) fixed settings from 0.5 to 4.0mA.
Time Range: Ten (10) fixed settings from 3 to 20 minutes.
Treatment Dose Range: One hundred (100) fixed dose values from 1.5 to 80 mA-minutes.
Open Circuit Driving Voltage: approximately 100 VDC.
Impedance Range: 0-15 Kohms with application current of 4.0mA; 0-20 Kohms with application current of 3.5mA or less.
Drug Polarity: Drug delivery electrode can assume "+" or "-" for either phase.


Minimal Setup Required
You only set current, time, and polarity.

Dual Treatment Capability
The dual site treatment function enables you to treat two sites simultaneously, saving time and money.

Identifies and Displays Open Circuit
When inadequate patient contact occurs, Microphor indicates "OPEN". When patient contact is re-established, the current automatically returns to the preset level, and delivery continues until the required dose is achieved.

Drives Positive and Negative Ions
Microphor requires only a touch of the switch to move from positive to negative ions, eliminating the need to switch leads.

Automatically Prevent Application of Current Transients
Microphor automatically ramps up and ramps down for both "ON" and "OFF" to prevent application of current transients.

Home                    Life-Tech Products                  Contact Us